The CCNA™ certification (Cisco Certified Network Associate) indicates a foundation in and apprentice knowledge of networking. CCNA™ certified professionals can install, configure and operate LAN and WAN services.
This course provides the information you need to identify, design and recommend the best Cisco solutions for small to medium-sized businesses. It provides the installation, configuration, and troubleshooting information that technical support people require to install and configure the CISCO products. The lectures are based on networking simulation programs to increase your understanding of the products.
Upon completion, successful delegates will have an unrivaled understanding of how to effectively Install, Manage, and Configure a data centre environment to optimise the enterpeise with the best quality of network. In addition, you will be prepared for the CCNA™ course and obtain an international certificate.
• Describe the purpose and functions of various network devices.
• Select the components required to meet a network specification.
• Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network.
• Describe common networked applications including web applications.
• Describe the purpose and basic operation of the protocols in the OSI and TCP models.
• Describe the impact of applications (Voice Over IP and Video Over IP) on a network.
• Interpret network diagrams.
• Determine the path between two hosts across a network.
• Describe the components required for network and Internet communications.
• Identify and correct common network problems at layers 1, 2, 3 and 7 using a layered model approach.
• Differentiate between LAN/WAN operation and features.
• Explain the technology and media access control method for Ethernet networks.
• Explain network segmentation and basic traffic management concepts.
• Explain basic switching concepts and the operation of Cisco switches.
• Perform and verify initial switch configuration tasks including remote access management.
• Verify network status and switch operation using basic utilities (including: ping, traceroute, telnet, SSH, arp, ipconfig), SHOW & DEBUG commands.
• Identify, prescribe, and resolve common switched network media issues, configuration issues, auto negotiation, and switch hardware failures.
• Describe enhanced switching technologies (including: VTP, RSTP, VLAN, PVSTP, 802.1q).
• Describe how VLANs create logically separate networks and the need for routing between them.
• Configure, verify, and troubleshoot VLANs.
• Configure, verify, and troubleshoot trunking on Cisco switches.
• Configure, verify, and troubleshoot interVLAN routing.
• Configure, verify, and troubleshoot VTP.
• Configure, verify, and troubleshoot RSTP operation.
• Interpret the output of various show and debug commands to verify the operational status of a Cisco switched network.
• Implement basic switch security (including: port security, trunk access, management vlan other than vlan1, etc.).
• Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and hosts.
• Describe the operation and benefits of using private and public IP addressing.
• Explain the operation and benefits of using DHCP and DNS.
• Configure, verify and troubleshoot DHCP and DNS operation on a router.(including: CLI/SDM).
• Implement static and dynamic addressing services for hosts in a LAN environment.
• Calculate and apply an addressing scheme including VLSM IP addressing design to a network.
• Determine the appropriate classless addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment.
• Describe the technological requirements for running IPv6 in conjunction with IPv4 (including: protocols, dual stack, tunneling, etc).
• Describe IPv6 addresses.
• Identify and correct common problems associated with IP addressing and host configurations.
• Describe different methods for connecting to a WAN.
• Configure and verify a basic WAN serial connection.
• Configure and verify Frame Relay on Cisco routers.
• Troubleshoot WAN implementation issues.
• Describe VPN technology (including: importance, benefits, role, impact, components).
• Configure and verify a PPP connection between Cisco routers.
• Describe basic routing concepts (including: packet forwarding, router lookup process).
• Describe the operation of Cisco routers (including: router bootup process, POST, router components).
• Select the appropriate media, cables, ports, and connectors to connect routers to other network devices and hosts.
• Configure, verify, and troubleshoot RIPv2.
• Access and utilize the router to set basic parameters.(including: CLI/SDM).
• Connect, configure, and verify operation status of a device interface.
• Verify device configuration and network connectivity using ping, traceroute, telnet, SSH or other utilities.
• Perform and verify routing configuration tasks for a static or default route given specific routing requirements.
• Manage IOS configuration files. (including: save, edit, upgrade, restore).
• Manage Cisco IOS.
• Compare and contrast methods of routing and routing protocols.
• Configure, verify, and troubleshoot OSPF.
• Configure, verify, and troubleshoot EIGRP.
• Verify network connectivity (including: using ping, traceroute, and telnet or SSH).
• Troubleshoot routing issues.
• Verify router hardware and software operation using SHOW & DEBUG commands.
• Implement basic router security.
• Describe standards associated with wireless media (including: IEEE WI-FI Alliance, ITU/FCC).
• Identify and describe the purpose of the components in a small wireless network. (Including: SSID, BSS, ESS).
• Identify the basic parameters to configure on a wireless network to ensure that devices connect to the correct access point.
• Compare and contrast wireless security features and capabilities of WPA security (including: open, WEP, WPA-1/2).
• Identify common issues with implementing wireless networks. (Including: Interface, missconfiguration).
• Describe today's increasing network security threats and explain the need to implement a comprehensive security policy to mitigate the threats.
• Explain general methods to mitigate common security threats to network devices, hosts, and applications.
• Describe the functions of common security appliances and applications.
• Describe security recommended practices including initial steps to secure network devices.
• Describe the purpose and types of ACLs.
• Configure and apply ACLs based on network filtering requirements.(including: CLI/SDM).
• Configure and apply an ACLs to limit telnet and SSH access to the router using (including: SDM/CLI).
• Verify and monitor ACLs in a network environment.
• Troubleshoot ACL issues.
• Explain the basic operation of NAT.
• Configure NAT for given network requirements using (including: CLI/SDM).
• Troubleshoot NAT issues.
Cumhuriyet Cad. No:5
Floor 5 - Taksim
+90 (553) 743 83 69
You can also reach us via VOIP
Do not hesitate to send your inquiry